Graphite Felt Felt Cleaning Electrode Graphite Manufacturing Metalworking

Description

Graphite Felt Felt Cleaning Electrode Graphite Manufacturing Metalworking
DESCRIPTION
Graphite Felt Felt Cleaning Electrode Graphite Manufacturing Metalworking
features:
1. Blanket carbon felt made by preoxidation and carbonization of polyacrylonitrile based flat felt
2. Soft texture, light weight, small heat, good heat insulation, easy to cut, easy to operate
3. Corrosion resistance, high temperature density and high leakage
4. Long life and energy saving
5. Used for vacuum furnace, induction furnace insulation energy storage battery, experimental conductive electrode gas adsorption material, filtering and removing stains
Parameters:
Size: 100 × one hundred × 3mm,100 × one hundred × 5mm,100 × one hundred × 10mm,300 × two hundred × 3mm,300 × two hundred × 5mm,300 × two hundred × 10mm,200 × two hundred × 10mm
Thickness: 3/5/10mm
Technical indicators:
Carbon content: 98% or higher
Moisture absorption rate: 2%
Operating environment: air 350 ° C
Vacuum 1800 ° C
Inert gas 2650 ° C
Specific resistance: (Ω. mm2/m)
Horizontal: 8.2-11.1x10 m3
Vertical: 11.8-16.8X10m3
Application field:
1. It can be used as a flame retardant material in the thermal insulation industry;
2. As a porous material, it can be used as catalyst carrier in chemical industry;
3. It can be used as a corrosion resistant material for composite lining or external protective layer.
4. It can be widely used as conductive, absorbing and absorbing materials in aviation, battery, automobile, automobile and other fields,
Electrode (such as electrode tube, electrode rod, etc.); At present, the application of conductive concrete is also developing rapidly.
5. It can be used as adsorption material for gas and liquid purification; Natural gas industry, such as desulfurization and denitration; Carbon fiber felt has high temperature resistance and can be used for high temperature removal in heavy pollution industries, such as power plants and sulfuric acid plants. Pollution industry; Liquid, such as oil absorption;
6. Insulation and refractory materials for high temperature furnace, carbonization furnace, quartz furnace, vacuum furnace, induction furnace, high-frequency furnace, heat balance reaction furnace, heat treatment furnace, sintering furnace, brazing furnace, high-pressure furnace, etc. Especially suitable for high temperature vacuum furnace, intermittent operation, can save a lot of energy.
The package includes:
1 * Graphite felt
Notes:
1. When the temperature exceeds 300 ° C, it must be used in vacuum or under the protection of inert gas. No stress shall be applied during transportation and storage, and moisture-proof measures shall be taken.
2. Please allow 1-2cm error in manual measurement and make sure you don't mind before ordering.
3. Please understand that there may be color difference due to the position of the picture
POLICES
Shipping
Payment
WARRANTY
We only
ship to confirmed ebay Order addresses.
Please comfirm that your Order address is in line with your shipping address.
Please kindly note that
the c
ombined shipping
is not provided
because the shipping fee is calculated by weight. Also, the each additional item means
exactly
the the same color and size.
It takes about
7
-15 working days to US; about 10-30 working days to other countries.
Transit time may be a little delayed because of the
bad
weather and customs
inspection
. If you
do
not receive your
item
within 30 working days since payment finished, please contact us immediately for further assistance.
Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.
We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions,
p
lease feel free to contact us via "Ask seller a question" . We will reply your email within 24
working hours.
On Nov 11, 2022 at 02:55:23 PST, seller added the following information: